In recent years, with the continuous advancement of industrialization and urbanization, the social economy has developed rapidly, but the subsequent pollution problem has become an important issue that needs to be solved urgently. Wastewater treatment has gradually become indispensable for economic development and water resources protection. component. Therefore, vigorously developing wastewater treatment technology and industrialization level is an important way to prevent water pollution and alleviate water shortages.
Advantages of peristaltic pump
1、Simple structure, the entire pipeline can use elastic tubing, and has self-locking characteristics, without complicated joints and valves.
2、Peristaltic pump has high precision stepper motor or servo motor, flow accuracy can reach ±0.5%. The function of liquid supply pump and flow meter.
3、The liquid is only in contact with the peristaltic pump hose and is not contaminated by the external environment; and the inner wall of the pump tube is smooth and there is no hygienic dead angle.
4、Simple maintenance, when the pipeline is contaminated or blocked, only need to replace a pump tube, the entire maintenance time does not exceed one minute.
5、The feeding speed can be easily adjusted，flow range of peristaltic pump can be freely controlled from 0.006-13000mL/min.
6、Easy to operate, can directly set the peristaltic pump flow, visual and intuitive.
7、RS485 communication can be combined with upper computer PLC, man-machine, frequency converter, etc., to form an automatic feeding system.
8、Through a series of optimized configurations, continuous and stable feed transfer and long line life can be achieved to minimize maintenance.
Wastewater treatment overview:
Wastewater treatment is the process of purifying wastewater to meet the water quality requirements for discharge into a water body or reuse. Modern wastewater treatment technology is divided into primary, secondary and tertiary treatment according to the degree of treatment.
The primary treatment mainly removes the suspended solid matter in the wastewater. Physical methods are commonly used. After the first-level treatment, BOD can generally be removed by about 30%, which does not meet the discharge standard. The first-level treatment belongs to the pretreatment of the second-level treatment.
The secondary treatment mainly removes the colloidal and dissolved organic matter (BOD, COD) in the wastewater. Generally, the wastewater that reaches the secondary treatment can meet the discharge standard, and the activated sludge method and the biofilm treatment method are commonly used.
Tertiary treatment to further remove certain special pollutants, such as phosphorus, nitrogen, and organic pollutants, inorganic pollutants, and pathogens that are difficult to biodegrade. The main methods include biological nitrogen and phosphorus removal method, coagulation precipitation method, sand filtration method, activated carbon adsorption method, ion exchange method and electroosmosis analysis method, etc.
Wastewater treatment needs:
In the wastewater treatment process of the factory, in order to ensure the quality of drinking water, accurate quantitative feeding is required for primary disinfection, secondary disinfection and pH control, and pumps are required in these processes. Chemical substances such as ferric chloride, sodium hypochlorite, chlorine, carbon, lime, etc. often cause gear wear and pump blockage, resulting in a decrease in pump performance and life, especially lime and polymer electrolytes that will seriously affect pump operation. , The usual solution is to replace the new pump. At the same time, the performance of the shear-sensitive flocculant will be greatly reduced when it passes through the high flow rate and tortuous pump channel.
Therefore, safe, accurate and efficient chemical dosage and delivery is the goal of every wastewater treatment operation. The industry urgently needs a pump that can be used to handle the most demanding applications to optimize the production process, reduce maintenance work and reduce costs. Improve processing efficiency.
Recommended Products
BT100S basic speed variable peristaltic pump
WT300S large torque speed variable peristaltic pump
WG600S industrial speed variable peristaltic pump
Lead Fluid has always focused on the design, R&D, manufacturing and marketing of peristaltic pumps, committed to providing users with high-quality peristaltic pump products and perfect technical services, and strived harder to make contributions to the society as we can to prevent water Pollution and protection of water resources silently contribute our strength behind the scenes.