Product

2
3

MM10 Series ODM Peristaltic Pump

Short Description:

Flow range:≤144ml/min

Max number of channels:1

Send Email To Us

MM10 Series ODM Peristaltic Pump

 

■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Pharmed, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.

■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.

■The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.

■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.

■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.

■Small size, convenient installation and simple operation.

■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.

 

Material

Shell PC
Roller PET

 

Flow Rate Parameter

Tube material:Silicone, Pharmed, PVC, Viton Wall thickness0.8-0.92mm

ID(mm) 0.25 0.5 1 1.52 2 2.4 3.2
mL/rpm 0.002 0.014 0.037 0.1 0.148 0.23 0.36
mL/min (continuous working max100rpm) 0.17 1.4 3.7 10 15 23 36
mL/min ( interval working max 400rpm) 0.68 5.6 14.8 40 60 92 144

★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, medium etc. Above for reference only

 

Specifications

Channel 1
Roller 3
Flow range ≤144ml/min
Speed continuous working ≤100rpm
interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance)
Tubing method Tube connector built-in(ID ≥1.6mm)
Whole Tube
Clearance adjustment Fixed clearance
Motor 12V/24V DC gear motor/stepper motor
Transmission pressure ≤0.10MPa
Working temperature 0~40℃
Power <10W

 

Motor Specification

DC brush motor Speed:35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm
Voltage:DC12V/3W, DC24V/3W
Speed accuracy: ≤±10%
Service life:1000 hours

 

DC brushless motor Speed:45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm
Voltage:DC12V/3W, DC24V/3W
Speed :≤±10%

 

20 Stepper motor Motor parameter: step angle 1.8° \ phase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20%
Speed range: ≤200rpm

 

Dimension (DC gear motor)

 

Dimension (20 Stepper motor)

Leave Your Message