Product

2
3

G6060-1S Industrial Micro Syringe Pump

Short Description:

Flow range:

Max number of channel:

Send Email To Us

Function and Feature

■ Lead Fluid industrial micro syringe pump G6060-1S mainly suitable for high-precision micro liquid of continuous transmission, dilution and dispensing.
■ Rated stroke 60mm, standard mode 6000 steps,microstep mode up to 48000 steps.
■ Stepper motor, backlash compensation screw assembly drive, mechanical reversal with extremely high transmission stability and accuracy.
■ Can assembly a 50ul-25ml gas tight syringe, and the linear velocity range is wider.
■ The material of the valve body and the fluid path has excellent chemical properties, adapting to various neutral and corrosive solutions.
■ It can be used in various ways, it can be controlled by external signal, it can also be controlled by PC communication or it can run automatically offline.

Schematic diagram(Three-port valve)

Components

SPECIFICATION

Technical Parameter

Linear speed 0.01mm/s~50mm/s
Running time 1.2 s~100 min(Rated stroke)
Flow accuracy error≤1%(Rated stroke)
Flow repeatability CV≤0.05%(Rated stroke,25℃ Deionized water,1ml and above syringe)
Power supply DC 24V/2.0A
Syringe 50μl/100μl/250μl/500μl/1ml/2.5ml/5ml/10ml/25ml
Rated stroke 60mm
Control resolution standard mode 6000 steps,microstep mode 48000 steps(rated stroke)
Syringe fitting 1/4-28UNF inner thread
Syringe material Borosilicate glass syringe, stainless steel push rod, PTFE piston
Piston drive Stepper motor,Backlash compensation screw assembly drive, orthogonal encoding to detect position
Reversing valve standard:120°3 port
Valve position time ≤250 millisecond(Between two adjacent valves)
Valve material PTFE, PCTFE
Valve fitting 1/4-28UNF inner thread
Signal input 2 gates TTL Level signal input (drive current>16mA)
Signal output 3 gates TTL level signal outpump
Communication RS485/RS232
Protocol DT protocol, ODM protocol
Bit rate 9600bps/38400bps can set
Parameter setting 7 digit dial switch
Chain communication Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485
Firmware upgrade Upgrade via computer RS232 interface
Programming function Ramp, cut-off speed, gap compensation, injection speed, cycle,Real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes
Working environment temperature 15℃~40℃,relative humidity<80%
Storage envirionment -20℃~65℃
Dimension 114×65×254mm(L×W×H)
Weight 2.1kg

 

Syringe

 

Syringe 50μl 100μl 250μl 500μl 1ml 5ml 10ml 25ml
Min Flow (ml/min) 0.0003125 0.000625 0.001563 0.003125 0.00625 0.03125 0.0625 0.15625
Max Flow (ml/min) 2.5 5.0 12.5 25 50 250.0 500.0 1250.0

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, medium etc. Above for reference only.

 

Connector and Pipeline

Thread inverted taper joint

Specification 1/4-28UNF
Material PTFE

Transmission line

Specification 0.5×1.6mm 1.0×1.6mm 1.6×3.2mm
Material PTFE

 

Dimension

UN:mm