Produit
G6060-1S Industrial Micro Syringe Pump
brève description:
Envoyez-nous un e-mail
Fonction et fonctionnalité
■ Lead Fluid industrial micro syringe pump G6060-1S mainly suitable for high-precision micro liquid of continuous transmission, dilution and dispensing.
■ Rated stroke 60mm, standard mode 6000 steps，microstep mode up to 48000 steps.
■ Stepper motor, backlash compensation screw assembly drive, mechanical reversal with extremely high transmission stability and accuracy.
■ Can assembly a 50ul-25ml gas tight syringe, and the linear velocity range is wider.
■ The material of the valve body and the fluid path has excellent chemical properties, adapting to various neutral and corrosive solutions.
■ It can be used in various ways, it can be controlled by external signal, it can also be controlled by PC communication or it can run automatically offline.
Schematic diagram（Three-port valve）
Components
SPECIFICATION
Paramètre technique
| Linear speed | 0.01mm/s~50mm/s |
| Running time | 1.2 s~100 min（Rated stroke） |
| Flow accuracy | error≤1%（Rated stroke） |
| Flow repeatability | CV≤0.05%（Rated stroke，25℃ Deionized water，1ml and above syringe） |
| Source de courant | DC 24V/2.0A |
| Syringe | 50μl/100μl/250μl/500μl/1ml/2.5ml/5ml/10ml/25ml |
| Rated stroke | 60mm |
| Control resolution | standard mode 6000 steps，microstep mode 48000 steps（rated stroke） |
| Syringe fitting | 1/4-28UNF inner thread |
| Syringe material | Borosilicate glass syringe, stainless steel push rod, PTFE piston |
| Piston drive | Stepper motor，Backlash compensation screw assembly drive, orthogonal encoding to detect position |
| Reversing valve | standard：120°3 port |
| Valve position time | ≤250 millisecond（Between two adjacent valves） |
| Valve material | PTFE, PCTFE |
| Valve fitting | 1/4-28UNF inner thread |
| Signal input | 2 gates TTL Level signal input (drive current＞16mA) |
| Signal output | 3 gates TTL level signal outpump |
| Communication | RS485/RS232 |
| Protocol | DT protocol, ODM protocol |
| Bit rate | 9600bps/38400bps can set |
| Parameter setting | 7 digit dial switch |
| Chain communication | Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485 |
| Firmware upgrade | Upgrade via computer RS232 interface |
| Programming function | Ramp, cut-off speed, gap compensation, injection speed, faire du vélo,Real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes |
| Environnement de travail | temperature 15℃~40℃，humidité relative <80% |
| Storage envirionment | -20℃～65℃ |
| Dimension | 114×65×254mm(L×L×H) |
| Poids | 2.1kg |
Syringe
| Syringe | 50μl | 100μl | 250μl | 500μl | 1ml | 5ml | 10ml | 25ml |
| Min Flow (ml/min) | 0.0003125 | 0.000625 | 0.001563 | 0.003125 | 0.00625 | 0.03125 | 0.0625 | 0.15625 |
| Débit maximum (ml/min) | 2.5 | 5.0 | 12.5 | 25 | 50 | 250.0 | 500.0 | 1250.0 |
Les paramètres de débit ci-dessus sont obtenus en utilisant un tube en silicone pour transférer de l'eau pure à température et pression normales., son utilisation réelle est affectée par des facteurs spécifiques tels que la pression, moyen, etc.. Ci-dessus pour référence seulement.
Connector and Pipeline
Thread inverted taper joint
| spécification | 1/4-28UNF |
| Matériel | PTFE |
Transmission line
| spécification | 0.5×1,6 mm | 1.0×1,6 mm | 1.6×3.2mm |
| Matériel | PTFE | ||
Dimension
UN:mm
